Parameters |
Power Supply Rejection Ratio (PSRR) |
130dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
30μV |
Low-Bias |
NO |
Micropower |
YES |
Programmable Power |
NO |
Dual Supply Voltage |
12V |
Wideband |
NO |
Height Seated (Max) |
1.2mm |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
BIPOLAR |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
OP747 |
Pin Count |
14 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
28V |
Power Supplies |
+-1.5/+-15/3/30V |
Number of Channels |
4 |
Operating Supply Current |
1.56mA |
Nominal Supply Current |
1.16mA |
Quiescent Current |
290μA |
Slew Rate |
0.2V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
110 dB |
Current - Input Bias |
5nA |
Voltage - Supply, Single/Dual (±) |
2.7V~30V ±1.35V~15V |
Output Current per Channel |
30mA |
Supply Type |
Dual, Single |
Input Offset Voltage (Vos) |
300μV |
Gain Bandwidth Product |
700kHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
700 kHz |
Voltage Gain |
113.98dB |
Average Bias Current-Max (IIB) |
0.01μA |
OP747ARUZ-REEL Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. The total number of pins on linear amplifier is 14. Please take in mind that this instrumentation amplifier should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 14 pins are present on the instrumentation amplifier. The input offset voltage is 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, this op amp functions well at -40°C~85°C. A supply current of 1.56mA can be used to operate this linear amplifier. 113.98dB should remain the voltage gain. On the buffer amps, there are 4 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 28V. TAPE AND REEL is adopted to pack the instrumentation amplifier. There is an 290μA quiescent current running through op amp ic.
OP747ARUZ-REEL Features
14 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
OP747ARUZ-REEL Applications
There are a lot of Analog Devices Inc. OP747ARUZ-REEL Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Large motor controllers
- single/dual op amp sum and difference circuits
- Power transmission
- Gaming industry
- Communication device
- Computer workstations
- Multiplication circuits
- Non-polarized electrodes
- Commercial audio systems