OP747ARZ
| Parameters | |
|---|---|
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 30μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 5 (48 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP747 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 4 |
| Operating Supply Current | 1.56mA |
| Nominal Supply Current | 320μA |
| Output Current | 30mA |
| Quiescent Current | 290μA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5nA |
| Max Input Voltage | 14V |
| Voltage - Supply, Single/Dual (±) | 2.7V~30V ±1.35V~15V |
| Output Current per Channel | 30mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 700 kHz |
OP747ARZ Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. There are a total of 14 pins on this op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 300μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 1.56mA . There should be no change in the voltage gain. There are 4 channels on the operational amplifiers. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. Linear amplifier has a quiescent current of 290μA.
OP747ARZ Features
14 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
OP747ARZ Applications
There are a lot of Analog Devices Inc. OP747ARZ Instrumentational OP Amps applications.
- Integrator circuits
- Test and measurement instruments
- Biopotential
- Power generator
- Polarized electrodes
- Medical instruments
- Oscilloscopes
- Information processing
- Video data acquisition
- High input resistance broadband
