OP747ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 5 (48 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP747 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 4 |
| Operating Supply Current | 1.56mA |
| Quiescent Current | 290μA |
| Supply Current-Max | 1.8mA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~30V ±1.35V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 700kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 30μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP747ARZ-REEL Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 14 terminations over the past year. A total of 14 pins are located on this board. This linear amplifier should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. There is an input offset voltage of 300μV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 1.56mA supply current, this operational amplifier ics can be operated. Voltage gain should remain at 113.98dB. Buffer op amp is equipped with 4 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Linear amplifier has a quiescent current of 290μA.
OP747ARZ-REEL Features
14 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
OP747ARZ-REEL Applications
There are a lot of Analog Devices Inc. OP747ARZ-REEL Instrumentational OP Amps applications.
- Portable electronic products powered by batteries
- Medical instruments
- Multimedia playback equipment
- Wireless base stations
- Test equipment
- Displayers for aircraft and air transportation control systems
- Automatic control
- Medical imaging
- High gain DC amplifier
- Micro signal measurement
