OP747ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 5 (48 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP747 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15/3/30V |
| Number of Channels | 4 |
| Operating Supply Current | 1.56mA |
| Quiescent Current | 290μA |
| Supply Current-Max | 1.8mA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~30V ±1.35V~15V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 700kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 30μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Wideband | NO |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP747ARZ-REEL7 Overview
Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 14 terminations in the next few months. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 14 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 300μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 1.56mA . There should be no change in the voltage gain. Buffer op amp is equipped with 4 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. There is an 290μA quiescent current in linear amplifier.
OP747ARZ-REEL7 Features
14 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
OP747ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP747ARZ-REEL7 Instrumentational OP Amps applications.
- earphone
- Video computer boards
- Non-polarized electrodes
- Fast A/D and D/A converters
- Exponential operation circuits
- Multiplication circuits
- Vehicle electronics
- Video conversion and routing
- Signal filtering
- Blood pressure sensors
