OP777ARZ-REEL7
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP777 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 28V |
| Number of Channels | 1 |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 270μA |
| Quiescent Current | 350μA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~30V ±1.35V~15V |
| Output Current per Channel | 30mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 200μV |
| Gain Bandwidth Product | 700kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 30μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 12V |
| Wideband | NO |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
OP777ARZ-REEL7 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. A Tape & Reel (TR) case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. This op amp can operate from a supply current at 350μA. There should be no change in the voltage gain. On the buffer amps, there are 1 channels that can be used. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 28V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. 350μA quiescent currents are flowing through buffer op amp.
OP777ARZ-REEL7 Features
8 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
OP777ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP777ARZ-REEL7 Instrumentational OP Amps applications.
- earphone
- single/dual op amp sum and difference circuits
- Fission chambers
- Automotive sensors
- Portable electronic products powered by batteries
- Instrumentation
- Addition operation circuits
- Professional videography
- Polarized electrodes
- Cinema or auditorium audio system
