OP90GSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP90 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 14μA |
| Quiescent Current | 9μA |
| Supply Current-Max | 0.03mA |
| Slew Rate | 0.012V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 4nA |
| Voltage - Supply, Single/Dual (±) | 1.6V~36V ±0.8V~18V |
| Output Current per Channel | 5mA |
| Input Offset Voltage (Vos) | 450μV |
| Bandwidth | 20 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 20 kHz |
| Voltage Gain | 118.06dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 125μV |
| Bias Current-Max (IIB) @25C | 0.025μA |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP90GSZ-REEL7 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 15V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. There is an input offset voltage of 450μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. A supply current of 14μA can be used to operate this linear amplifier. There should be no change in the voltage gain. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. The current is quiescent at 9μA.
OP90GSZ-REEL7 Features
8 Pins
supply voltage of 15V
118.06dB voltage gain
OP90GSZ-REEL7 Applications
There are a lot of Analog Devices Inc. OP90GSZ-REEL7 Instrumentational OP Amps applications.
- Fission chambers
- Laptop
- Multimedia playback equipment
- Radiation thermometry transducers
- Inverse/same-phase proportional circuit
- Ultrasound transducers
- Signal amplification
- Subtraction operation circuits
- Fast A/D and D/A converters
- Radar
