OP913SL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-5 Variant, 2 Leads, Lens Top Metal Can |
| Number of Pins | 2 |
| Operating Temperature | -65°C~125°C |
| Packaging | Bulk |
| Published | 1997 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -65°C |
| Voltage - Rated DC | 32V |
| Diode Type | PIN |
| Power Dissipation | 150mW |
| Viewing Angle | 45° |
| Voltage - DC Reverse (Vr) (Max) | 32V |
| Rise Time | 50ns |
| Fall Time (Typ) | 50 ns |
| Max Reverse Voltage (DC) | 32V |
| Reverse Breakdown Voltage | 32V |
| Reverse Voltage | 60V |
| Wavelength | 900nm |
| Dark Current | 25nA |
| Active Area | 8.53mm2 |
| Current - Dark (Typ) | 25nA |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
OP913SL Overview
To prevent damage, the photodiodes are packaged in a Bulk. It is necessary to enclose the photodiodes in TO-5 Variant, 2 Leads, Lens Top Metal Can packages for safety purposes. When photodiodes are continuously reverse-biased, the maximum voltage they can withstand is 32V. In reverse-bias mode, the voltage for the photodiodes should not exceed 32V continuously. There are 2 pins on the photodiodes. As a result of the photodiodes, a circuit could produce 150mW heat. A photodiode should not operate at a temperature higher than 125°C. However, the minimum operating temperature for the photodiodes should be set at -65°C. A reverse anode voltage of 32V should be applied to the photodiodes. As long as the photodiodes were reverse-biased, they could supply the voltage 60V. The photodiode will operate at 25nA current even in the absence of light input.
OP913SL Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -65°C~125°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Viewing Angle: 45°
OP913SL Applications
There are a lot of TT Electronics/Optek Technology OP913SL Photodiodes applications.
- Heart Rate Monitoring
- Optical Analytics
- Light Bariers
- Pulse Oximetry
- Electronic Equipment
- Shaft encoders
- Photo interrupters
- High speed photo detectors
- Diode Laser Monitoring
- Optical Switches
