OP955
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Bulk |
| Published | 1997 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Voltage - Rated DC | 60V |
| Output Voltage | 60V |
| Diode Type | PIN |
| Power Dissipation | 100mW |
| Viewing Angle | 90° |
| Forward Current | 1mA |
| Response Time | 5ns |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Rise Time | 5ns |
| Fall Time (Typ) | 5 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Voltage | 60V |
| Wavelength | 935nm |
| Dark Current | 1nA |
| Spectral Range | 500nm ~ 1100nm |
| Current - Dark (Typ) | 1nA |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
OP955 Overview
A Bulk package protects these photodiodes from damage. It is necessary to place the photodiodes into Radial packages in order to protect them from damage. It is possible for the photodiodes to withstand 60V voltage in reverse-bias mode on a continuous basis. It is recommended to set the reverse-bias mode for the photodiodes to not exceed 60V on a continuous basis. Photodiodes have a pin count of 2. A circuit made up of photodiodes could release heat 100mW. As a rule of thumb, when photodiodes are operating, the temperature should not exceed 100°C. However, the photodiodes should be operated at a minimum temperature of -40°C. The photodiodes were capable of supplying 60V voltage when operating in reverse-bias mode. It is possible for a photodiode to produce 1nA even without light input.
OP955 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 5ns
Viewing Angle: 90°
OP955 Applications
There are a lot of TT Electronics/Optek Technology OP955 Photodiodes applications.
- Heart Rate Monitoring
- YAG laser detection
- Health Monitoring
- Position sensing
- Photo interrupters
- Infrared remote control
- Measurement Levelling
- Light Barriers
- Infrared data transmission
- Solar Cells
