OP97FP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP97 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 380μA |
| Max Supply Current | 600μA |
| Quiescent Current | 600μA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 25μV |
| Gain Bandwidth Product | 900 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.00075μA |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 30μV |
| Low-Bias | YES |
| Micropower | YES |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
OP97FP Overview
The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. Op amp ic rates 25μV for input offset voltage. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using an 600μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 126.02dB at all times. Instrumentation amplifier has 1 channels on it. The current is quiescent at 600μA.
OP97FP Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
OP97FP Applications
There are a lot of Analog Devices Inc. OP97FP Instrumentational OP Amps applications.
- Gaming industry
- Medical imaging
- High gain DC amplifier
- Active probe
- Division circuits
- MP3
- Switching amplifier
- Fast A/D and D/A converters
- Portable electronic products powered by batteries
- Tablets
