OP97FPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP97 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 400μA |
| Max Supply Current | 600μA |
| Quiescent Current | 600μA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Input Offset Voltage (Vos) | 25μV |
| Bandwidth | 900 kHz |
| Gain Bandwidth Product | 900 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.00075μA |
| Power Supply Rejection Ratio (PSRR) | 132dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 30μV |
| Low-Bias | YES |
| Micropower | YES |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP97FPZ Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 25μV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 600μA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 126.02dB is the best course of action. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 15V voltage. 600μA quiescent currents are flowing through buffer op amp.
OP97FPZ Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
OP97FPZ Applications
There are a lot of Analog Devices Inc. OP97FPZ Instrumentational OP Amps applications.
- Strain gauges
- High gain DC amplifier
- Commercial audio systems
- Car stereo
- Professional videography
- Active probe
- Multimedia playback equipment
- Medical instruments
- Video conversion and routing
- Radar
