OP993
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | PCB, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-18 |
| Number of Pins | 2 |
| Operating Temperature | -40°C~100°C |
| Packaging | Bulk |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Voltage - Rated DC | 60V |
| Output Voltage | 60V |
| Number of Channels | 1 |
| Diode Type | PIN |
| Power Dissipation | 100mW |
| Viewing Angle | 90° |
| Forward Current | 1mA |
| Response Time | 5ns |
| Voltage - DC Reverse (Vr) (Max) | 60V |
| Rise Time | 5ns |
| Forward Voltage | 1.2V |
| Fall Time (Typ) | 5 ns |
| Max Reverse Voltage (DC) | 60V |
| Reverse Breakdown Voltage | 60V |
| Reverse Voltage | 60V |
| Wavelength | 890nm |
| Input Current | 1mA |
| Dark Current | 1nA |
| Spectral Range | 500nm ~ 1100nm |
| Current - Dark (Typ) | 1nA |
| Height | 7.62mm |
| Length | 5.72mm |
| Width | 5.72mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
OP993 Overview
In order to protect the photodiodes against damage, they are packaged in the Bulk. It is necessary to enclose the photodiodes in TO-18 packages for safety purposes. Continually operating in reverse-bias mode, a photodiode's maximum voltage is 60V. In reverse-bias mode, the voltage for the photodiodes should not exceed 60V continuously. It has 2 pins for the photodiodes. Within a circuit, photodiodes could generate 100mW heat. It is recommended that photodiodes are operated at a temperature no higher than 100°C. However, the photodiodes should be operated at a minimum temperature of -40°C. In the case of photodiodes, the reverse anode voltage should be 60V. Photodiodes require an electric potential of 1.2V in order to conduct current. When the photodiodes were operated in reverse bias, they would supply the voltage 60V. Photodiodes exhibit 1nA current even in the absence of light input.
OP993 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 5ns
Viewing Angle: 90°
OP993 Applications
There are a lot of TT Electronics/Optek Technology OP993 Photodiodes applications.
- Light Bariers
- Optical Switches
- Medical and Industrial
- Low Capacitance
- Infrared data transmission
- Low Cost Light Monitoring
- Pure UV-C Monitoring
- Currency Validation
- Sterilization Lamp Monitoring
- Health Monitoring
