banner_page

OP999

OP999 datasheet pdf and Optical Sensors - Photodiodes product details from TT Electronics/Optek Technology stock available at Noco


  • Manufacturer: TT Electronics/Optek Technology
  • Nocochips NO: 861-OP999
  • Package: -
  • Datasheet: PDF
  • Stock: 456
  • Description: OP999 datasheet pdf and Optical Sensors - Photodiodes product details from TT Electronics/Optek Technology stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Number of Pins 2
Housing Material Plastic
Operating Temperature -40°C~100°C
Packaging Bulk
Published 1997
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 100°C
Min Operating Temperature -40°C
Voltage - Rated DC 60V
Max Power Dissipation 100mW
Lead Length 19.1mm
Number of Channels 1
Diode Type PIN
Power Dissipation 100mW
Viewing Angle 40°
Response Time 5ns
Voltage - DC Reverse (Vr) (Max) 60V
Rise Time 5ns
Forward Voltage 1.2V
Fall Time (Typ) 5 ns
Max Reverse Voltage (DC) 60V
Reverse Voltage 60V
Wavelength 890nm
Max Input Current 1mA
Peak Wavelength 890 nm
Dark Current 1nA
Spectral Range 500nm ~ 1100nm
Current - Dark (Typ) 1nA
Height 8.89mm
Length 6.22mm
Width 6.22mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

OP999 Overview


As a protective measure, these photodiodes are packaged in the Bulk. Continuously reverse-biasing photodiodes can withstand 60V voltage. As long as the photodiodes are operated in reverse-bias mode, they should not exceed voltage 60V. A photodiode is equipped with 2 pins. A circuit containing photodiodes may be able to release 100mW heat. In order for photodiodes to function, the temperature must not exceed 100°C. However, the photodiodes should be operated at a minimum temperature of -40°C. Generally, the maximum amount of heat released by photodiodes is 100mW. When current flows across a photodiode, it needs voltage 1.2V. It is possible for the photodiodes to supply 60V voltage when they are reverse-biased. Photodiodes exhibit 1nA current even in the absence of light input.

OP999 Features


Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 5ns
Viewing Angle: 40°

OP999 Applications


There are a lot of TT Electronics/Optek Technology OP999 Photodiodes applications.

  • Solar Cells
  • Vision Controls
  • Photo interrupters
  • Machine Controls
  • Position sensing
  • Low Capacitance
  • Heart Rate Monitoring
  • Low Cost Light Monitoring
  • Health Monitoring
  • High speed photo detectors

Write a review

Note: HTML is not translated!
    Bad           Good