OPA121KU
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA121 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 500mW |
| Output Current | 10mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 114dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 2MHz |
| Max I/O Voltage | 3mV |
| Input Offset Current-Max (IIO) | 0.0002μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Difet® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
OPA121KU Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 2.5mA . It is recommended to keep the voltage gain at 114dB at all times. There are a total of 1 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 18V voltage. Instrumentation amplifiers are numbered by their Difet? series.
OPA121KU Features
8 Pins
supply voltage of 15V
114dB voltage gain
OPA121KU Applications
There are a lot of Texas Instruments OPA121KU Instrumentational OP Amps applications.
- Non-polarized electrodes
- Car stereo
- Broadcasting
- E-book readers
- RF cable systems
- Signal transformation
- Radiation thermometry transducers
- Division circuits
- Hand-held batteries
- Weighing systems
