OPA124UA
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| Series | Difet® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 750mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA124 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 750mW |
| Output Current | 10mA |
| Slew Rate | 1.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 94 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1500 kHz |
| Voltage Gain | 125dB |
| Average Bias Current-Max (IIB) | 0.000002μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 1.5MHz |
| Max I/O Voltage | 500μV |
| Nominal Supply Voltage (DC) | 15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA124UA Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. In the case of Tube cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. There is an input offset voltage of 500μV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -25°C~85°C. The buffer amplifier is capable of operating from a supply current of 2.5mA . There should be no change in the voltage gain. Op amp ic has 1 channels. As the name implies, Difet? refers to the series of the buffer op amp.
OPA124UA Features
8 Pins
supply voltage of 15V
125dB voltage gain
OPA124UA Applications
There are a lot of Texas Instruments OPA124UA Instrumentational OP Amps applications.
- pH (acidity)
- Industrial applications including automation
- Television broadcasting equipment
- Strain gauges
- Navigation
- Division circuits
- Computer workstations
- Displayers for aircraft and air transportation control systems
- Image computer boards
- Logarithmic operation circuits
