OPA128KM
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-99-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | Difet® |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA128 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 500mW |
| Output Current | 10mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.075pA |
| Voltage - Supply, Single/Dual (±) | ±5V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 128dB |
| Average Bias Current-Max (IIB) | 0.000004μA |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 140μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 5.72mm |
| Length | 9.08mm |
| Width | 9.08mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA128KM Overview
In the package, you will find a TO-99-8 Metal Can-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. The input offset voltage is 500μV. For this electrical component, Through Hole is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 900μA . Voltage gain should remain at 128dB. The op amp is rated for an operating supply voltage of 1. The Difet? indicates the series number of the op amp.
OPA128KM Features
8 Pins
supply voltage of 15V
128dB voltage gain
OPA128KM Applications
There are a lot of Texas Instruments OPA128KM Instrumentational OP Amps applications.
- Industrial control system
- Home audio systems
- Power transmission
- Video conversion and routing
- High speed sample
- Radiation thermometry transducers
- High/low-pass filter circuit
- E-book readers
- Division circuits
- Television broadcasting equipment
