OPA129UB

1 Channels 10mA per Channel 0.03pA 80 dB Instrumentational OP Amps 10V~36V ±5V~18V OPA129 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA129UB
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 365
Description: 1 Channels 10mA per Channel 0.03pA 80 dB Instrumentational OP Amps 10V~36V ±5V~18V OPA129 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Lifecycle Status	LIFEBUY (Last Updated: 2 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	Difet®
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Last Time Buy
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	OPA129
Pin Count	8
Number of Channels	1
Operating Supply Current	1.2mA
Nominal Supply Current	1.8mA
Output Current	10mA
Slew Rate	2.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	80 dB
Current - Input Bias	0.03pA
Voltage - Supply, Single/Dual (±)	10V~36V ±5V~18V
Output Current per Channel	10mA
Input Offset Voltage (Vos)	2mV
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	1000 kHz
Voltage Gain	120dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	500μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Dual Supply Voltage	9V
Nominal Gain Bandwidth Product	1MHz
Max I/O Voltage	2mV
Power	NO
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA129UB Overview

Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. Op amp ic rates 2mV for input offset voltage. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.2mA and 10 . It is recommended to keep the voltage gain at 120dB at all times. Instrumentation amplifier has 1 channels on it. In this case, Difet? represents the instrumentation amplifiers' series number.