Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Base Part Number |
OPA130 |
Pin Count |
8 |
Number of Channels |
1 |
Operating Supply Current |
530μA |
Nominal Supply Current |
650μA |
Slew Rate |
2V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
5pA |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±2.25V~18V |
Output Current per Channel |
18mA |
Input Offset Voltage (Vos) |
1mV |
Bandwidth |
1MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
1000 kHz |
Voltage Gain |
135dB |
Average Bias Current-Max (IIB) |
0.00002μA |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
200μV |
Low-Bias |
YES |
Micropower |
YES |
Programmable Power |
NO |
Dual Supply Voltage |
9V |
Nominal Gain Bandwidth Product |
1MHz |
Max I/O Voltage |
1mV |
Power |
NO |
Input Offset Current-Max (IIO) |
0.00002μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
OPA130UA Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. We are approaching the 8h termination of the year. The pins on this board total to 8 in total. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 1mV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 530μA and 10 . Voltage gain should remain at 135dB. 1 channels are available on the instrumentation amplifier.
OPA130UA Features
8 Pins
supply voltage of 15V
135dB voltage gain
OPA130UA Applications
There are a lot of Texas Instruments OPA130UA Instrumentational OP Amps applications.
- Medical imaging
- Proportional counter tubes
- Blood pressure sensors
- Industrial applications including automation
- Video amplifiers
- Subtraction operation circuits
- Cinema or auditorium audio system
- Ultrasound transducers
- Vehicle electronics
- Tablets