OPA134PAG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OPA134 |
| Pin Count | 8 |
| Operating Supply Voltage | 36V |
| Number of Elements | 1 |
| Operating Supply Current | 4mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 35mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 8MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Nominal Gain Bandwidth Product | 8MHz |
| Input Offset Current-Max (IIO) | 0.00005μA |
| Load Impedance | 2kOhm |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA134PAG4 Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. The instrumentation amplifier in this picture is of the Audio-type. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 4mA , this buffer op amp will be able to operate. Voltage gain should remain at 120dB. It is possible to count 1 elements on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 36V. Instrumentation amplifiers are numbered by their SoundPlus? series.
OPA134PAG4 Features
8 Pins
supply voltage of 15V
120dB voltage gain
OPA134PAG4 Applications
There are a lot of Texas Instruments OPA134PAG4 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Proportional operation circuits
- Large motor controllers
- ECG equipment
- Medical imaging
- Video computer boards
- Industrial control system
- Thermocouples
- Subtraction operation circuits
- Portable docking station
