OPA137NA/250
| Parameters | |
|---|---|
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 10mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA137 |
| Pin Count | 5 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Nominal Supply Current | 270μA |
| Output Current | 60mA |
| Current - Supply | 220μA |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 94dB |
| Power Supply Rejection Ratio (PSRR) | 80.92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | YES |
OPA137NA/250 Overview
A SC-74A, SOT-753 case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The op amp is delivered to you in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 5. Buffer amplifier has a total of 5 pins on it. This linear amplifier should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 5 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 10mV. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. 94dB should be the voltage gain. Instrumentation amplifier has 1 channels on it. The operating supply voltage of the buffer op amp is rated at 18V. The linear amplifier is packaged by using a TR axis. It is recommended that this electronic component be used with an 220μA supply. MicroAmplifier? is the number that corresponds to the series of the buffer op amp.
OPA137NA/250 Features
5 Pins
supply voltage of 15V
94dB voltage gain
OPA137NA/250 Applications
There are a lot of Texas Instruments OPA137NA/250 Instrumentational OP Amps applications.
- Video computer boards
- Addition operation circuits
- Proportional operation circuits
- pH (acidity)
- Portable media players
- High-frequency data acquisition systems
- Signal filtering
- Portable docking station
- Industrial control system
- Multimedia playback equipment
