OPA137NA/3K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | MicroAmplifier™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA137 |
| Pin Count | 5 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Nominal Supply Current | 270μA |
| Output Current | 60mA |
| Current - Supply | 220μA |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 94dB |
| Power Supply Rejection Ratio (PSRR) | 80.92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 1MHz |
| Max I/O Voltage | 10mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA137NA/3K Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 5 pins. Regarding input offset voltage, op amp rates 10mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Keeping the voltage gain at 94dB is the best course of action. There are a total of 1 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. It is used TR to pack the op amps. This electronic part is recommended to be used with an 220μA supply for best performance. Buffer op amp series numbers are indicated by the MicroAmplifier?.
OPA137NA/3K Features
5 Pins
supply voltage of 15V
94dB voltage gain
OPA137NA/3K Applications
There are a lot of Texas Instruments OPA137NA/3K Instrumentational OP Amps applications.
- Home audio systems
- Precision measurement
- Comparator
- Band-pass filter
- Professional videography
- High-frequency data acquisition systems
- single/dual op amp sum and difference circuits
- Division circuits
- Multimedia playback equipment
- Multiplication circuits
