OPA137PA

1 Channels 60mA per Channel 5pA 70 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA137 8 Pins 8-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA137PA
Package: 8-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 211
Description: 1 Channels 60mA per Channel 5pA 70 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA137 8 Pins 8-DIP (0.300, 7.62mm)(Kg)

Inquiry Now

Details

Tags

Parameters
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	MicroAmplifier™
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Base Part Number	OPA137
Pin Count	8
Operating Supply Voltage	18V
Number of Channels	1
Operating Supply Current	220μA
Nominal Supply Current	270μA
Output Current	60mA
Slew Rate	3.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	5pA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	60mA
Input Offset Voltage (Vos)	10mV
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	1000 kHz
Voltage Gain	94dB
Power Supply Rejection Ratio (PSRR)	80.92dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	2.5mV
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Dual Supply Voltage	15V
Nominal Gain Bandwidth Product	1MHz
Max I/O Voltage	10mV
Height	4.57mm
Length	9.81mm
Width	6.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA137PA Overview

The linear amplifier is packaged in a 8-DIP (0.300, 7.62mm) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, op amp rates 10mV. This electronic component is recommended to be mounted using the mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 220μA and 10 . Voltage gain should remain at 94dB. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The MicroAmplifier? represents the op amp's series number.