OPA137UA

1 Channels 60mA per Channel 5pA 70 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA137 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA137UA
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 835
Description: 1 Channels 60mA per Channel 5pA 70 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA137 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	MicroAmplifier™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Base Part Number	OPA137
Pin Count	8
Operating Supply Voltage	18V
Number of Channels	1
Operating Supply Current	220μA
Nominal Supply Current	270μA
Output Current	60mA
Slew Rate	3.5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	5pA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	60mA
Input Offset Voltage (Vos)	10mV
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	1000 kHz
Voltage Gain	94dB
Power Supply Rejection Ratio (PSRR)	80.92dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	2.5mV
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Dual Supply Voltage	15V
Nominal Gain Bandwidth Product	1MHz
Max I/O Voltage	10mV
Input Offset Current-Max (IIO)	0.00005μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA137UA Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. The case in which buffer amplifier is delivered is called a Tube case. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are included on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 220μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 94dB. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 18V voltage. In this case, MicroAmplifier? represents the instrumentation amplifiers' series number.