OPA140AIDBVR
| Parameters | |
|---|---|
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | OPA140 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 2mA |
| Output Current | 36mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 126 dB |
| Current - Input Bias | 0.5pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 36mA |
| Input Offset Voltage (Vos) | 120μV |
| Bandwidth | 11MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 126dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 30μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Max I/O Voltage | 120μV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
OPA140AIDBVR Overview
Op amp is packaged in SC-74A, SOT-753 case. Op amps are J-FET types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. The number of terminations approaches 5. There are a total of 5 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 18V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 5 pins on it. Regarding input offset voltage, op amp rates 120μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 1.8mA, this op amp ic can operate. The voltage gain should stay at 126dB. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of the buffer op amp is rated at 18V. For packing the buffer amplifier, the TR-axis is adopted.
OPA140AIDBVR Features
5 Pins
supply voltage of 18V
126dB voltage gain
Output Type: Rail-to-Rail
OPA140AIDBVR Applications
There are a lot of Texas Instruments OPA140AIDBVR Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Mobile phone
- Blood pressure sensors
- Information processing
- Image computer boards
- Fission chambers
- Instrumentation
- High input resistance broadband
- E-book readers
- Video computer boards
