OPA140AIDGKR

1 Channels 36mA per Channel 0.5pA 126 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA140 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-OPA140AIDGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 124
Description: 1 Channels 36mA per Channel 0.5pA 126 dB Instrumentational OP Amps 18V 4.5V~36V ±2.25V~18V OPA140 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	18V
Terminal Pitch	0.65mm
Base Part Number	OPA140
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	18V
Number of Channels	1
Operating Supply Current	1.8mA
Nominal Supply Current	2mA
Output Current	36mA
Slew Rate	20V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	126 dB
Current - Input Bias	0.5pA
Voltage - Supply, Single/Dual (±)	4.5V~36V ±2.25V~18V
Output Current per Channel	36mA
Input Offset Voltage (Vos)	120μV
Bandwidth	11MHz
Neg Supply Voltage-Nom (Vsup)	-18V
Unity Gain BW-Nom	11000 kHz
Voltage Gain	126dB
Power Supply Rejection Ratio (PSRR)	140dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	20V
Voltage - Input Offset	30μV
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Nominal Gain Bandwidth Product	11MHz
Max I/O Voltage	120μV
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

OPA140AIDGKR Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the J-FET type. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are located on this board. The linear amplifier should be run at 18V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 120μV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 1.8mA, this op amp ic can operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 18V. For packing the buffer amplifier, the TR-axis is adopted.