Parameters |
Supply Voltage |
18V |
Terminal Pitch |
0.65mm |
Base Part Number |
OPA141 |
Pin Count |
8 |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
18V |
Number of Elements |
1 |
Operating Supply Current |
1.8mA |
Nominal Supply Current |
2.3mA |
Output Current |
36mA |
Slew Rate |
20V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
120 dB |
Current - Input Bias |
2pA |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±2.25V~18V |
Output Current per Channel |
36mA |
Input Offset Voltage (Vos) |
3.5mV |
Neg Supply Voltage-Nom (Vsup) |
-18V |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
126dB |
Average Bias Current-Max (IIB) |
0.00002μA |
Power Supply Rejection Ratio (PSRR) |
137.07dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
20V |
Voltage - Input Offset |
1mV |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00002μA |
Programmable Power |
NO |
Nominal Gain Bandwidth Product |
10MHz |
Max I/O Voltage |
3.5mV |
Wideband |
NO |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Operational Amplifier |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
OPA141AIDGKT Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. J-FET-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. In total, there are 8 pins on this op amp ic. As a reminder, this buffer op amp should be powered by 18V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 3.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 1.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 126dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. There are a total of 1 elements in this linear amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA141AIDGKT Features
8 Pins
supply voltage of 18V
126dB voltage gain
Output Type: Rail-to-Rail
OPA141AIDGKT Applications
There are a lot of Texas Instruments OPA141AIDGKT Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- E-book readers
- Subtraction operation circuits
- earphone
- Test equipment
- Navigation
- Radiation thermometry transducers
- Digital cameras
- Information processing
- Ultrasound transducers