OPA1602AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA1602 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 36V |
| Number of Channels | 2 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.6mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 35MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 126.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Gain | 120 dB |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 35MHz |
| Max I/O Voltage | 1mV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA1602AID Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called Audio-types. In the case of Tube cases, linear amplifier will be delivered. A total of 8 terminations have been reported in the past few weeks. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 15V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 100μV voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 2.6mA and 10 . It is recommended to keep the voltage gain at 120dB at all times. The op amp ic has 2 channels on it. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 36V voltage. SoundPlus? is the number that corresponds to the series of the buffer op amp.
OPA1602AID Features
8 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
OPA1602AID Applications
There are a lot of Texas Instruments OPA1602AID Instrumentational OP Amps applications.
- Fission chambers
- Car stereo
- Division circuits
- Radiation thermometry transducers
- Video computer boards
- Video conversion and routing
- Portable docking station
- Exponential operation circuits
- Hand-held batteries
- Industrial control system
