OPA1604AIDR
| Parameters | |
|---|---|
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Digi-Reel® |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | OPA1604 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 36V |
| Number of Circuits | 4 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.8mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 100μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 35MHz |
| Max I/O Voltage | 1mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 1.75mm |
OPA1604AIDR Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Digi-Reel? case. We are approaching the 14h termination of the year. The total number of pins on linear amplifier is 14. This linear amplifier should be powered by an 15V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 14 pins are located on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. This op amp can operate from a supply current at 2.6mA. It is recommended to keep the voltage gain at 120dB at all times. On this instrumentation amplifier, there are 4 circuits that are connected together. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 36V voltage. The linear amplifier is packaged by using a TR axis. SoundPlus? corresponds to linear amplifier's series.
OPA1604AIDR Features
14 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
OPA1604AIDR Applications
There are a lot of Texas Instruments OPA1604AIDR Instrumentational OP Amps applications.
- High gain DC amplifier
- Hand-held batteries
- Television
- Measurements of Wheatstone bridge
- Polarized electrodes
- MP3
- Mobile phone
- RF cable systems
- Test and measurement instruments
- Broadcasting
