OPA1612AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OPA1612 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Operating Supply Current | 3.6mA |
| Nominal Supply Current | 3.6mA |
| Slew Rate | 27V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 60nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 62mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 40MHz |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 40000 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Gain | 130 dB |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 100Hz |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 40MHz |
| Input Offset Current-Max (IIO) | 0.175μA |
| Load Impedance | 2kOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA1612AID Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are Audio types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 100μV. Surface Mount is the recommended mounting type of operational amplifiers. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.6mA and 10 . 130dB should remain the voltage gain. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of the buffer op amp is rated at 18V. SoundPlus? corresponds to the op amp's series.
OPA1612AID Features
8 Pins
supply voltage of 15V
130dB voltage gain
OPA1612AID Applications
There are a lot of Texas Instruments OPA1612AID Instrumentational OP Amps applications.
- Radar
- Industrial control system
- Portable media players
- MP3
- Video data acquisition
- Car stereo
- Gaming industry
- Video conversion and routing
- ECG equipment
- Industrial applications including automation
