OPA1632DGNG4
| Parameters | |
|---|---|
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Gain | 78 dB |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 180MHz |
| Input Offset Current-Max (IIO) | 0.5μA |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.408939mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 2W |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA1632 |
| Pin Count | 8 |
| Output Type | Differential |
| Number of Elements | 1 |
| Operating Supply Current | 14mA |
| Nominal Supply Current | 14mA |
| Output Current | 85mA |
| Slew Rate | 50V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 5V~32V ±2.5V~16V |
| Output Current per Channel | 85mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 180MHz |
| Gain Bandwidth Product | 180MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 78dB |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
OPA1632DGNG4 Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. In total, the buffer amplifier consists of 8 pins. Op amp rates 3mV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 14mA . Voltage gain should remain at 78dB. In addition to outputting Differential signals, this op amp ic offers a number of other advantages. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply.
OPA1632DGNG4 Features
8 Pins
supply voltage of 15V
78dB voltage gain
Output Type: Differential
OPA1632DGNG4 Applications
There are a lot of Texas Instruments OPA1632DGNG4 Instrumentational OP Amps applications.
- Communication
- Integrator circuits
- Power generator
- PDA
- Large motor controllers
- earphone
- Comparator
- Information processing
- Exponential operation circuits
- Portable docking station
