OPA1641AID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | OPA1641 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 36mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 11MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 134dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Power Supply Rejection Ratio (PSRR) | 137.08dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 40V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Input Offset Current-Max (IIO) | 0.00002μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA1641AID Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Audio-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 8. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 18V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. As far as the input offset voltage is concerned, linear amplifier rates at 3.5mV. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 1.8mA. 134dB should remain the voltage gain. Buffer op amp is equipped with 1 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. This buffer amplifier is assigned within the SoundPlus? series by its manufacturer.
OPA1641AID Features
8 Pins
supply voltage of 18V
134dB voltage gain
Output Type: Rail-to-Rail
OPA1641AID Applications
There are a lot of Texas Instruments OPA1641AID Instrumentational OP Amps applications.
- Professional videography
- High speed sample
- Voltage regulation circuit
- Instrumentation
- Automotive sensors
- Displayers for aircraft and air transportation control systems
- Television
- Multimedia playback equipment
- Portable electronic products powered by batteries
- Test equipment
