OPA1641AIDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA1641 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 36mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 134dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Power Supply Rejection Ratio (PSRR) | 137.08dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 40V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.00002μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA1641AIDGKR Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the Audio-type. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 18V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are included on the operational amplifiers. Op amp ic rates 3.5mV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Operational amplifier can operate supply current at 1.8mA. Voltage gain should remain at 134dB. On the output type, there are Rail-to-Rail different types of op amps. A voltage rating of 1 is indicated for the op amp's operating supply voltage. As a result of this, the buffer amplifier is packed in TR. Buffer op amp series numbers are indicated by the SoundPlus?.
OPA1641AIDGKR Features
8 Pins
supply voltage of 18V
134dB voltage gain
Output Type: Rail-to-Rail
OPA1641AIDGKR Applications
There are a lot of Texas Instruments OPA1641AIDGKR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Signal amplification
- Portable docking station
- Hand-held batteries
- Car stereo
- Power transmission
- Band-pass filter
- Gaming industry
- Computer workstations
- Television
