OPA1642AIDR
| Parameters | |
|---|---|
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 11MHz |
| Wideband | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Base Part Number | OPA1642 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 36mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 11MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 11000 kHz |
| Voltage Gain | 134dB |
| Power Supply Rejection Ratio (PSRR) | 137.08dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 40V |
| Low-Bias | YES |
OPA1642AIDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Audio-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 18V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 8 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. The mounting type that is recommended for this electrical part is Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. An 1.8mA volt supply current is needed for this linear amplifier to operate. Op amp is a member of the 134dB's 134dB family. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. 2 elements make up the design of this buffer amplifier. A TR-shaped amplifier is used to pack the buffer amps. The SoundPlus? represents the op amp's series number.
OPA1642AIDR Features
8 Pins
supply voltage of 18V
134dB voltage gain
Output Type: Rail-to-Rail
OPA1642AIDR Applications
There are a lot of Texas Instruments OPA1642AIDR Instrumentational OP Amps applications.
- Wireless base stations
- Industrial control system
- Scintillation detectors
- Hand-held batteries
- MP3
- Band-stop filter
- Video data acquisition
- pH (acidity)
- High-frequency data acquisition systems
- Communication
