OPA1652AIDGKR
| Parameters | |
|---|---|
| Slew Rate | 10V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 18000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 0.0001μA |
| Power Supply Rejection Ratio (PSRR) | 110.46dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0001μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 18MHz |
| Max I/O Voltage | 1.5mV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA1652 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 2 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
OPA1652AIDGKR Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Audio-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. Please take in mind that op amp should be run at 15V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. The mounting type that is recommended for this electrical part is Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 2mA, this op amp ic can operate. There should be no change in the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There are 2 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 18V voltage. For packing the buffer amplifier, the TR-axis is adopted. In this case, SoundPlus? represents the instrumentation amplifiers' series number.
OPA1652AIDGKR Features
8 Pins
supply voltage of 15V
114dB voltage gain
Output Type: Rail-to-Rail
OPA1652AIDGKR Applications
There are a lot of Texas Instruments OPA1652AIDGKR Instrumentational OP Amps applications.
- Navigation
- Voltage regulation circuit
- single/dual op amp sum and difference circuits
- Proportional operation circuits
- Industrial control system
- Video data acquisition
- Tablets
- PDA
- Blood pressure sensors
- Inverse/same-phase proportional circuit
