OPA1662AIDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | OPA1662 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Circuits | 2 |
| Operating Supply Current | 1.5mA |
| Slew Rate | 17V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 600nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 22MHz |
| Max I/O Voltage | 1.5mV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA1662AIDRQ1 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Op amps are Audio types of amplifier on the chip. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 15V battery. Instrumentation amplifier is a part of Operational Amplifier. The op amp ic has an array of 8 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . You can run this op amp ic on 1.5mA . It is recommended to keep the voltage gain at 100dB at all times. During the manufacturing process, this buffer amplifier is divided into 2 circuits. On the output type, there are Rail-to-Rail different types of op amps. It is used TR to pack the op amps. As the name implies, Automotive, AEC-Q100, SoundPlus? refers to the series of the buffer op amp.
OPA1662AIDRQ1 Features
8 Pins
supply voltage of 15V
100dB voltage gain
Output Type: Rail-to-Rail
OPA1662AIDRQ1 Applications
There are a lot of Texas Instruments OPA1662AIDRQ1 Instrumentational OP Amps applications.
- Industrial control system
- PDA
- Signal transformation
- Navigation
- High-frequency data acquisition systems
- Radar
- Fast A/D and D/A converters
- Television broadcasting equipment
- Portable media players
- Hand-held batteries
