OPA1664AIPW
| Parameters | |
|---|---|
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 1.2μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 1.2μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 22MHz |
| Max I/O Voltage | 1.5mV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA1664 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-18/3/36V |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Slew Rate | 17V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 600nA |
OPA1664AIPW Overview
Op amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. An op amp of this type is a Audio-type. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. Operational amplifier can operate supply current at 1.5mA. Keeping the voltage gain at 100dB is the best course of action. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The total number of elements in this buffer amplifier is 4. The operating supply voltage of the buffer op amp is rated at 18V. SoundPlus? corresponds to linear amplifier's series.
OPA1664AIPW Features
14 Pins
supply voltage of 15V
100dB voltage gain
Output Type: Rail-to-Rail
OPA1664AIPW Applications
There are a lot of Texas Instruments OPA1664AIPW Instrumentational OP Amps applications.
- Power transmission
- Portable media players
- Signal filtering
- Multimedia playback equipment
- Test equipment
- Information processing
- Video conversion and routing
- Signal transformation
- Automotive sensors
- Communication device
