OPA1664AIPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | SoundPlus™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OPA1664 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-18/3/36V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Slew Rate | 17V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 106 dB |
| Current - Input Bias | 600nA |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 22000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 1.2μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 1.2μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 22MHz |
| Max I/O Voltage | 1.5mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA1664AIPWR Overview
Packaging for the buffer amplifier is in the form of a 14-TSSOP (0.173, 4.40mm Width) case. An op amp of this type is a Audio-type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be at least 14 terminations this year. In this case, there are 14 pins on the board. Please take in mind that this instrumentation amplifier should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 500μV. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 1.5mA supply current, this operational amplifier ics can be operated. 114dB should be the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. TR is adopted to pack the instrumentation amplifier. SoundPlus? corresponds to linear amplifier's series.
OPA1664AIPWR Features
14 Pins
supply voltage of 15V
114dB voltage gain
Output Type: Rail-to-Rail
OPA1664AIPWR Applications
There are a lot of Texas Instruments OPA1664AIPWR Instrumentational OP Amps applications.
- pH (acidity)
- Test equipment
- Oscilloscopes
- Signal filtering
- Power transmission
- Cinema or auditorium audio system
- Automatic control
- High speed sample
- MP3
- Vehicle electronics
