OPA170AIDBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | OPA170 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Operating Supply Current | 110μA |
| Nominal Supply Current | 110μA |
| Output Current | 17mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 8pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.8mV |
| Bandwidth | 1.2MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 1.2MHz |
| Max I/O Voltage | 1.8mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA170AIDBVR Overview
Packaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. In total, there are 5 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 18V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 5-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 1.8mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . You can run this op amp ic on 110μA . 130dB should be the voltage gain. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The linear amplifier is packaged by using a TR axis.
OPA170AIDBVR Features
5 Pins
supply voltage of 18V
130dB voltage gain
Output Type: Rail-to-Rail
OPA170AIDBVR Applications
There are a lot of Texas Instruments OPA170AIDBVR Instrumentational OP Amps applications.
- earphone
- Displayers for aircraft and air transportation control systems
- Test equipment
- E-book readers
- Polarized electrodes
- Integrator circuits
- Subtraction operation circuits
- Commercial audio systems
- pH (acidity)
- Signal operation
