OPA170AIDRLT
| Parameters | |
|---|---|
| Height | 600μm |
| Length | 1.6mm |
| Width | 1.2mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-553 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | OPA170 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 110μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 8pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1.8mV |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 250μV |
| Current - Output / Channel | 17mA |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 1.2MHz |
| Max I/O Voltage | 1.8mV |
| Wideband | NO |
OPA170AIDRLT Overview
The linear amplifier is packaged in a SOT-553 case. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 5 mark. There are a total of 5 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 18V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 5 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1.8mV. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . A supply current of 110μA can be used to operate this linear amplifier. The voltage gain should stay at 130dB. In total, there are 1 circuits on this buffer amplifier. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There are a total of 1 elements in this linear amplifier. To pack the operational amplifier ics, TR is adopted as the packing method.
OPA170AIDRLT Features
5 Pins
supply voltage of 18V
130dB voltage gain
Output Type: Rail-to-Rail
OPA170AIDRLT Applications
There are a lot of Texas Instruments OPA170AIDRLT Instrumentational OP Amps applications.
- Television broadcasting equipment
- Communication device
- Medical instruments
- Polarized electrodes
- Measurements of Wheatstone bridge
- Image computer boards
- Automation control systems
- Commercial audio systems
- Industrial control system
- Multimedia playback equipment
