OPA171AIDBVT
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | OPA171 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 475μA |
| Nominal Supply Current | 475μA |
| Output Current | 25mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 8pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 1.8mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
OPA171AIDBVT Description
The OPA171, OPA2171, and OPA4171 (OPAx171) are a series of low-noise, 36-V single-supply operational amplifiers that can run on supplies ranging from 2.7 V (1.355 V) to 36 V (18V). These micro-packaged devices have low offset, drift, and bandwidth, as well as a low quiescent current. For optimum design flexibility, the single, twin, and quad versions all share the same specs.
Unlike other operational amplifiers, which have a single supply voltage specification, the OPA171AIDBVT has a supply voltage range of 2.7 to 36 V. Phase reversal is not caused by input signals that extend beyond the supply rails. With capacitive loads up to 300 pF, the OPA171AIDBVT is stable. During typical operation, the input can function 100 mV below the negative rail and within 2 V of the top rail. These devices can work with full rail-to-rail input up to 100 mV beyond the top rail, however, performance is degraded below 2 V.
OPA171AIDBVT Features
Low offset drift: ±0.3 μV/°C (typical)
RFI filtered inputs
The input range includes the negative supply
Input range operates to a positive supply
Rail-to-rail output
Gain bandwidth: 3 MHz
Low quiescent current: 475 μA per amplifier
High common-mode rejection: 120 dB (typical)
Low-input bias current: 8 pA
OPA171AIDBVT Applications
Tracking amplifier in power modules
Merchant power supplies
Transducer amplifiers
Bridge amplifiers
Temperature measurements
Strain gauge amplifiers
Precision integrators
Battery-powered instruments
Test equipment
