OPA171AIDRLT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-553 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 18V |
| Base Part Number | OPA171 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 475μA |
| Nominal Supply Current | 475μA |
| Output Current | 25mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 8pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1MHz |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 1.8mV |
| Height | 600μm |
| Length | 1.6mm |
| Width | 1.2mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA171AIDRLT Overview
The linear amplifier is packaged in a SOT-553 case which makes it easy for the consumer to handle. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 5. Buffer amplifier has a total of 5 pins on it. Please take in mind that this instrumentation amplifier should be run at 18V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 5 pins on it. The input offset voltage is 250μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, op amp ranges -40°C~125°C. You can run this op amp ic on 475μA . There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 18V. The linear amplifier is packaged by using a TR axis.
OPA171AIDRLT Features
5 Pins
supply voltage of 18V
130dB voltage gain
Output Type: Rail-to-Rail
OPA171AIDRLT Applications
There are a lot of Texas Instruments OPA171AIDRLT Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Micro signal measurement
- Commercial audio systems
- Portable electronic products powered by batteries
- Medical imaging
- Proportional counter tubes
- Communication
- Comparator
- Home audio systems
- Mobile phone
