OPA171AQDBVRQ1
| Parameters | |
|---|---|
| Nominal Gain Bandwidth Product | 3MHz |
| Max I/O Voltage | 1.8mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | OPA171 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 475μA |
| Nominal Supply Current | 475μA |
| Output Current | 25mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 8pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 3MHz |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 130dB |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 40V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
OPA171AQDBVRQ1 Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. An op amp ic of the General Purpose type. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. It is estimated that there will be 5 terminations in the next few months. Linear amplifier has a total of 5 pins. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 5 pins are included on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 250μV. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureOperational amplifier can operate supply current at 475μA. Op amp is a member of the 130dB's 130dB family. As far as the device is concerned, buffer amplifier has 1 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 18V. To pack the operational amplifier ics, TR is adopted as the packing method. Automotive, AEC-Q100 corresponds to the op amp's series.
OPA171AQDBVRQ1 Features
5 Pins
130dB voltage gain
Output Type: Rail-to-Rail
OPA171AQDBVRQ1 Applications
There are a lot of Texas Instruments OPA171AQDBVRQ1 Instrumentational OP Amps applications.
- Commercial audio systems
- Communication device
- High gain DC amplifier
- Power transmission
- Large motor controllers
- Wireless base stations
- Gaming industry
- Fission chambers
- Precision measurement
- Signal amplification
