OPA177GS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | OPA177 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 22V |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 2mA |
| Current - Supply | 1.3mA |
| Slew Rate | 0.3V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 600 kHz |
| Gain Bandwidth Product | 600kHz |
| Voltage Gain | 135.56dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Voltage - Input Offset | 20μV |
| Max Dual Supply Voltage | 22V |
| Min Dual Supply Voltage | 3V |
| Dual Supply Voltage | 18V |
| Nominal Gain Bandwidth Product | 600 kHz |
| Max I/O Voltage | 60μV |
| Number of Amplifiers | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA177GS Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. An op amp ic of the General Purpose type. In the case of Tube cases, linear amplifier will be delivered. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 20μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureOperational amplifier can operate supply current at 1.3mA. There should be no change in the voltage gain at 135.56dB. This op amp ic has 1 circuits. Op amp ic has 1 channels. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. No temperature greater than 85°C should be used. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 18V. As a result, it is recommended that a power supply of 1.3mA be used with this electronic part. The electrical part is capable of being powered by a voltage of under 22V, which means that it can be used with any voltage supply. As a general rule, you should conduct this electronic component under dual supply voltages of 22V volts. On the linear amplifier, there are 1 amplifiers that are used.
OPA177GS Features
135.56dB voltage gain
OPA177GS Applications
There are a lot of Texas Instruments OPA177GS Instrumentational OP Amps applications.
- Hand-held batteries
- Semiconductor detectors
- Power transmission
- single/dual op amp sum and difference circuits
- Home audio systems
- Power control
- Subtraction operation circuits
- Video amplifiers
- E-book readers
- Band-stop filter
