OPA177GS/2K5
| Parameters | |
|---|---|
| Micropower | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 600 kHz |
| Max I/O Voltage | 60μV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA177 |
| Pin Count | 8 |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1.5mA |
| Slew Rate | 0.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 6V~36V ±3V~18V |
| Input Offset Voltage (Vos) | 60μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 20μV |
| Low-Bias | NO |
OPA177GS/2K5 Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 60μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . An 1.3mA volt supply current is needed for this linear amplifier to operate. The voltage gain should stay at 135.56dB. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 18V. This linear amplifier pack is based on the TR axis.
OPA177GS/2K5 Features
8 Pins
supply voltage of 15V
135.56dB voltage gain
OPA177GS/2K5 Applications
There are a lot of Texas Instruments OPA177GS/2K5 Instrumentational OP Amps applications.
- Signal amplification
- Video conversion and routing
- High input resistance broadband
- Thermocouples
- Voltage regulation circuit
- Television broadcasting equipment
- Power generator
- Semiconductor detectors
- Inverse/same-phase proportional circuit
- Video computer boards
