OPA188AIDBVR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | OPA188 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 450μA |
| Nominal Supply Current | 510μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 160pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 6μV |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 136dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 142dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 2MHz |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.006μA |
| Input Voltage Noise Density | 8.8nV/sqrt Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 hours ago) |
| Contact Plating | Gold |
OPA188AIDBVR Overview
Packaging for the buffer amplifier is in the form of a SC-74A, SOT-753 case. Buffer amps of this type are called Zero-Drift-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. In recent months, the number of terminations has approached 5. Buffer amplifier has a total of 5 pins. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. In total, the buffer amplifier consists of 5 pins. Regarding input offset voltage, buffer amplifier rates 6μV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using an 450μA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 136dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. 1 elements make up the design of this buffer amplifier. This linear amplifier pack is based on the TR axis.
OPA188AIDBVR Features
5 Pins
136dB voltage gain
Output Type: Rail-to-Rail
OPA188AIDBVR Applications
There are a lot of Texas Instruments OPA188AIDBVR Instrumentational OP Amps applications.
- Band-pass filter
- Radiation thermometry transducers
- Portable media players
- Power control
- Signal operation
- Medical imaging
- Strain gauges
- Non-polarized electrodes
- Gaming industry
- Commercial audio systems
