OPA188AIDBVT
| Parameters | |
|---|---|
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 142dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 1MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 2MHz |
| Input Offset Current-Max (IIO) | 0.006μA |
| Input Voltage Noise Density | 8.8nV/sqrt Hz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | OPA188 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 450μA |
| Supply Current-Max | 0.48mA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 160pA |
| Max Input Voltage | 36V |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 6μV |
| Bandwidth | 2MHz |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 136dB |
OPA188AIDBVT Overview
OPA188AIDBVT amplifier has a single supply. OPA188AIDBVT amp is low-power CMOS operational amplifier. The low current of the supply, as well as the input current bias, is a perfect fit for low-power devices such as smoke detectors as well as other sensors with high impedance. OPA188AIDBVT IC is ideal for applications that require low power on a single supply.
Op amp is packaged in SC-74A, SOT-753 case. Op amps are Zero-Drift types of amplifiers on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 5. Linear amplifier has a total of 5 pins. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 5 pins. Regarding input offset voltage, buffer amplifier rates 6μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 450μA. Op amp is a member of the 136dB's 136dB family. Instrumentation amplifier has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. It is used TR to pack the op amps.
OPA188AIDBVT Features
5 Pins
136dB voltage gain
Output Type: Rail-to-Rail
OPA188AIDBVT Applications
There are a lot of Texas Instruments OPA188AIDBVT Instrumentational OP Amps applications.
Medical imaging
Division circuits
High speed sample
Power transmission
Video computer boards
Biopotential
Industrial applications including automation
Active probe
Strain gauges
Proportional counter tubes
