OPA188AIDGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA188 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 450μA |
| Nominal Supply Current | 450μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 160pA |
| Max Input Voltage | 36V |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 6μV |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 136dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 2MHz |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.006μA |
| Input Voltage Noise Density | 250nV/sqrt Hz |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA188AIDGKR Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Zero-Drift type. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 8 terminations have been reported in the past few weeks. It consists of a total of 8 pins in total. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The op amp ic has an array of 8 pins on it. Op amp rates 6μV as input offset voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -55°C~150°C. As long as the supply current of the chip does not exceed 450μA, this op amp ic can operate. It is recommended to keep the voltage gain at 136dB at all times. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. A voltage rating of 1 is indicated for the op amp's operating supply voltage. TR is adopted to pack the instrumentation amplifier.
OPA188AIDGKR Features
8 Pins
136dB voltage gain
Output Type: Rail-to-Rail
OPA188AIDGKR Applications
There are a lot of Texas Instruments OPA188AIDGKR Instrumentational OP Amps applications.
- Signal filtering
- Mobile phone
- Division circuits
- Power transmission
- Gaming industry
- High speed sample
- single/dual op amp sum and difference circuits
- Automatic control
- Measurements of Wheatstone bridge
- Computer workstations
