banner_page

OPA188AIDGKT

1 Channels 18mA per Channel 160pA 120 dB Instrumentational OP Amps 0.004μA 4V~36V ±2V~18V OPA188 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-OPA188AIDGKT
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 234
  • Description: 1 Channels 18mA per Channel 160pA 120 dB Instrumentational OP Amps 0.004μA 4V~36V ±2V~18V OPA188 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Details

Tags

Parameters
Bandwidth 2MHz
Unity Gain BW-Nom 2000 kHz
Voltage Gain 136dB
Average Bias Current-Max (IIB) 0.004μA
Low-Offset YES
Frequency Compensation YES
Supply Voltage Limit-Max 20V
Low-Bias YES
Micropower YES
Max Frequency 1MHz
Programmable Power NO
Neg Supply Voltage-Max (Vsup) -20V
Nominal Gain Bandwidth Product 2MHz
Power NO
Input Offset Current-Max (IIO) 0.006μA
Input Voltage Noise Density 250nV/sqrt Hz
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~150°C
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number OPA188
Pin Count 8
Qualification Status Not Qualified
Output Type Rail-to-Rail
Number of Channels 1
Operating Supply Current 450μA
Nominal Supply Current 450μA
Slew Rate 0.8V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Zero-Drift
Common Mode Rejection Ratio 120 dB
Current - Input Bias 160pA
Voltage - Supply, Single/Dual (±) 4V~36V ±2V~18V
Output Current per Channel 18mA
Input Offset Voltage (Vos) 6μV

OPA188AIDGKT Overview


The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Zero-Drift type. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 6μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -55°C~150°C . You can run this op amp ic on 450μA . 136dB should remain the voltage gain. Op amp ic has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The linear amplifier is packaged by using a TR axis.

OPA188AIDGKT Features


8 Pins
136dB voltage gain
Output Type: Rail-to-Rail

OPA188AIDGKT Applications


There are a lot of Texas Instruments OPA188AIDGKT Instrumentational OP Amps applications.

  • Information processing
  • Proportional counter tubes
  • Power transmission
  • Fast A/D and D/A converters
  • High-frequency data acquisition systems
  • Automatic control
  • Blood pressure sensors
  • Semiconductor detectors
  • Addition operation circuits
  • Precision measurement

Write a review

Note: HTML is not translated!
    Bad           Good