OPA188AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | OPA188 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 1 |
| Operating Supply Current | 450μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 160pA |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 6μV |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 136dB |
| Average Bias Current-Max (IIB) | 0.004μA |
| Power Supply Rejection Ratio (PSRR) | 142dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 2MHz |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.006μA |
| Input Voltage Noise Density | 8.8nV/sqrt Hz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA188AIDR Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Zero-Drift-type instrumentation amplifiers are used in this application. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 6μV. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -55°C~150°C , which is a good operating temperature. A supply current of 450μA can be used to operate this linear amplifier. The voltage gain should stay at 136dB. There are 1 circuits on this op amp. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. This linear amplifier pack is based on the TR axis.
OPA188AIDR Features
8 Pins
136dB voltage gain
Output Type: Rail-to-Rail
OPA188AIDR Applications
There are a lot of Texas Instruments OPA188AIDR Instrumentational OP Amps applications.
- Signal operation
- Commercial audio systems
- Television
- Automotive sensors
- ECG equipment
- Television broadcasting equipment
- Band-stop filter
- Hand-held batteries
- Car stereo
- Signal transformation
