OPA209AID
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA209 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.5mA |
| Output Current | 65mA |
| Slew Rate | 6.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 35μV |
| Bandwidth | 18MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 18000 kHz |
| Voltage Gain | 132dB |
| Power Supply Rejection Ratio (PSRR) | 146.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0045μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 18MHz |
| Max I/O Voltage | 150μV |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
OPA209AID Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tube case. We are approaching the 8h termination of the year. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. Op amp ic rates 35μV for input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . A supply current of 2.2mA can be used to operate this linear amplifier. 132dB should remain the voltage gain. Op amp ic has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 18V voltage.
OPA209AID Features
8 Pins
supply voltage of 15V
132dB voltage gain
Output Type: Rail-to-Rail
OPA209AID Applications
There are a lot of Texas Instruments OPA209AID Instrumentational OP Amps applications.
- Semiconductor detectors
- Mobile phone
- Weighing systems
- Integrator circuits
- Voltage regulation circuit
- Measurements of Wheatstone bridge
- Precision measurement
- pH (acidity)
- Exponential operation circuits
- Biopotential
