OPA209AIDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OPA209 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 18V |
| Number of Elements | 1 |
| Operating Supply Current | 2.2mA |
| Nominal Supply Current | 2.5mA |
| Output Current | 65mA |
| Slew Rate | 6.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±2.25V~18V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 150μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 18000 kHz |
| Voltage Gain | 132dB |
| Power Supply Rejection Ratio (PSRR) | 146.02dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 35μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0045μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 18MHz |
| Max I/O Voltage | 150μV |
| Wideband | NO |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
OPA209AIDR Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Op amp rates 150μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. An 2.2mA volt supply current is needed for this linear amplifier to operate. You should keep the voltage gain at 132dB for the time being. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 18V voltage. The linear amplifier is packaged by using a TR axis.
OPA209AIDR Features
8 Pins
supply voltage of 15V
132dB voltage gain
Output Type: Rail-to-Rail
OPA209AIDR Applications
There are a lot of Texas Instruments OPA209AIDR Instrumentational OP Amps applications.
- Signal amplification
- Inverse/same-phase proportional circuit
- Television
- Fission chambers
- Large motor controllers
- Scintillation detectors
- Weighing systems
- Signal filtering
- Active probe
- Video computer boards
